The subjects comprise of a detached industrial and two storey office facility with concrete and hardcore yards along with a further�detached high bay warehouse.� The main industrial unit is of a steel portal frame construction with blockwork�walls to dado height and profile metal cladding thereafter. The roof over, which was replaced approx. 5 years ago is pitched and clad with insulated metal cladding incorporating translucent roof panels. Lighting is provided by a number of high bay LED light fitments. There are 2 roller shutter doors measuring circa 5.00M wide by 5.46M high with the eaves height being 5.2M. a 5T crane has been installed at the east of the side unit.� Warehouse offices have been installed within the space along with staff welfare facilities and a canteen. Above the warehouse offices is a mezzanine level which is accessed via a fixed metal staircase.� The warehouse has been extended to provide further warehouse/storage accommodation along with an area which was previously�used as a paint spray area. 3 roller shutter doors provide access to the areas.� The high bay warehouse is of steel portal frame construction which has been clad with insulated metal cladding with a pitched roof over similarly clad. Internally the eaves height is 8.28M and benefits from a 5T crane. The roller shutter door measures 5.00M wide by 5.30M High.� The office is over two storey and is laid out to provide a mixture of open plan and private office accommodation with kitchenette and w.c. facilities. There are good levels of natural light boxes located within the suspended ceiling. ( Agency Pilot Software ref: 6813 )
Virtual tour
